RTL8019AS is a network interface controller (NIC) chip developed by Realtek Semiconductor Corporation. It is an early Ethernet controller that supports 10 Mbps data transfer rate and operates on a 16-bit interface. The RTL8019AS is widely used in older computer systems and embedded devices.
The chip uses a parallel bus architecture and supports several network protocols, including TCP/IP, NetBEUI, IPX/SPX, and AppleTalk. It has built-in DMA and interrupt controllers to handle network traffic and can connect to both coaxial and twisted pair cables.
The RTL8019AS is a popular choice for creating low-cost Ethernet-based systems due to its simple design and low power consumption. However, it has been largely replaced by more advanced and faster Ethernet controllers in modern systems.
You need to download and install the RTL8019AS driver if you have a computer or device that uses this Ethernet controller chip and you want to use it to connect to a network.
A driver is a software program that allows the operating system to communicate with the hardware device. Without the proper driver installed, the operating system won’t be able to recognize and use the RTL8019AS chip. This means that you won’t be able to connect to a network and access the internet.
Installing the correct driver for the RTL8019AS chip ensures that the device will work properly and efficiently. The driver provides the necessary instructions to the operating system on how to interact with the hardware and how to handle data transmission over the network.
Therefore, if you have a device that uses the RTL8019AS chip, you need to download and install the correct driver to enable network connectivity and ensure that the device can function properly.
- Windows NT3.51 v2 (20 Kb)
- Windows for Workgroups V1.02 (20 Kb)
- Windows 98 v2 (59 KB)
- Windows NT4.0 v2 (20 Kb)
- Develop Kit (5 Mb)
- OEM disk for users and manufacturers v3.55 (0.5 Mb)
- Packet driver v 1.31 (5 KB)
- Linux guide and drivers v 1 (1 KB)
- SCO Unix v2.02 (40 KB)